您身边的电脑专家!
在信息、能源环境两大产业方向上不断探索、创新,形成了以计算机、数字城市、物联网应用
十大主干产业为核心的组织架构及发展格局。
Product Center
HP X132 10G SFP+ LC SR Transceiver J9150A is a 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-
Gigabit connectivity up to 300 m on multimode fiber.
Ports: 1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR); Duplex: full only
Connectivity
Connector type: LC
Wavelength: 850 nm
Physical characteristics
Dimensions: 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP+
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Electrical characteristics
Power consumption typical: 0.6 W
Power consumption maximum: 0.8 W
Cabling
Cable type: 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
2-26m with 62.5 µm multimode cable @ 160 MHz*km
2-33m with 62.5 µm multimode cable @ 200 MHz*km
2-66m with 50 µm multimode cable @ 400 MHz*km
2-82m with 50 µm multimode cable @ 500 MHz*km
2-300m with 50 µm multimode cable @ 2000 MHz*km
Cable length: 2-300m
Fiber type: Multi Mode
For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.